KBC30礦用隔爆型接近開關產品介紹
產品概述
KBC30礦用隔爆型接近開關是一款專為礦山及高危工業場景設計的非接觸式檢測裝置，通過電磁感應原理實現對金屬物體的可靠探測。本產品采用特殊結構設計和防護工藝，適用于存在可燃性氣體、粉塵等復雜工況的作業環境，為設備定位、安全防護及自動化控制提供穩定信號支持。
核心特點
-
強化安全結構
殼體采用高強度合金材料整體鑄造，結合多重密封技術，內部電路與外部環境完全隔離。機械結構經過特殊優化，具備抗沖擊和抗振動特性，有效降低設備在惡劣工況下的故障風險。
-
環境適應能力
工作溫度范圍覆蓋-25℃至+70℃，防護等級達到IP67級別，可在高濕度、多粉塵及短時浸水環境中保持穩定運行。特殊表面處理工藝使產品具備抗化學腐蝕能力，適應礦井巷道、露天礦區等復雜地質環境。
-
檢測性能優化
內置高靈敏度感應模塊，檢測距離最高可達15mm（根據安裝條件調整），響應時間小于2ms。配備狀態指示燈和抗干擾電路設計，有效避免設備群組間的信號串?dāng)_，確保檢測精度一致性。
-
便捷化應用
模塊化結構支持多種安裝方式，提供螺紋固定、支架安裝等多種配置方案。接線端子采用防松脫設計，支持DC12-36V寬電壓輸入，兼容主流工業控制系統信號接口。
應用領域
適用于礦山運輸設備定位、井下機械安全聯鎖、選礦設備狀態監測等場景，在帶式輸送機保護、罐籠定位系統、液壓支架控制等領域具有成熟應用案例。
KBC30 Mining Explosion-proof Proximity Switch Product Introduction
Product Overview
The KBC30 Mining Explosion-proof Proximity Switch is a non-contact detection device specifically designed for mining and high-risk industrial environments. Utilizing electromagnetic induction principle, it provides reliable metal object detection. Featuring specialized structural design and protective technologies, this product is engineered for stable operation in complex working conditions containing combustible gases and dust, delivering consistent signal output for equipment positioning, safety protection, and automation control systems.
Key Features
-
Enhanced Safety Construction
The housing adopts integral casting with high-strength alloy material and multi-layer sealing technology, achieving complete isolation between internal circuits and external environment. Optimized mechanical structure demonstrates impact resistance and vibration damping characteristics, effectively reducing operational failure risks under harsh working conditions.
-
Environmental Adaptability
Operational temperature range spans from -25℃ to +70℃ with IP67 protection rating, maintaining stable performance in high humidity, dusty environments, and temporary water immersion scenarios. Special surface treatment provides chemical corrosion resistance, suitable for complex geological conditions including mine tunnels and open-pit mining areas.
-
Detection Performance Optimization
Equipped with high-sensitivity induction module achieving maximum detection distance of 15mm (adjustable per installation conditions) and response time below 2ms. Integrated status indicator and anti-interference circuit design effectively prevent signal crosstalk in equipment clusters, ensuring measurement consistency.
-
User-friendly Application
Modular structure supports multiple installation methods including threaded fixation and bracket mounting. Anti-loosening terminal design accommodates DC12-36V wide voltage input, compatible with mainstream industrial control system interfaces.
Application Scenarios
Ideal for mining transport equipment positioning, underground machinery safety interlocking, and mineral processing equipment monitoring. Proven application cases include belt conveyor protection systems, cage positioning mechanisms, and hydraulic support control systems.
