RC-20F料位開關
RC-20F阻旋式料位開關產品介紹（中英文）
產品概述
RC-20F阻旋式料位開關是一種用于固態物料（如粉狀、顆粒狀）料位監測的機械式控制裝置。該產品通過微型馬達驅動檢測葉片旋轉，當物料觸及葉片時自動切斷電源并輸出開關信號，實現對料倉、容器內物料高度的定點檢測。其設計適用于飼料、水泥、塑料、化工等多種行業的物料監控場景。310
產品采用不銹鋼材質傳動軸與防護結構，具有防塵密封設計，可適應-20℃至80℃的工作環境（高溫型可達350℃）。葉片轉速為1轉/分鐘，支持水平或傾斜15-20度安裝方式，避免進料沖擊。通過調節內部扭力彈簧，可適配不同密度的物料檢測需求（最小適用比重0.3g/cm³）。614
工作原理
當料倉內無料時，馬達帶動葉片持續旋轉；當物料上升至葉片位置時，旋轉受阻觸發機械傳動機構，先輸出料位信號，隨后切斷電機電源。待料位下降后，裝置自動復位重啟監測。該過程完全通過機械結構實現，無復雜電子元件，抗干擾性強。1216
產品特點
• 機械過載保護：葉片負荷過大時馬達自動打滑，避免損壞驅動裝置
• 扭力可調：五檔靈敏度調節，適應塑料粉等輕質物料到金屬顆粒等重質物料
• 維護簡便：無需拆卸整機即可檢查內部組件，支持葉片長度定制
• 環境適應：IP65防護等級，特殊油封設計防止粉塵滲入軸承
• 多重安裝：提供螺紋型（RC-10B）、法蘭型（RC-11B）及軸保護管型（RC-20系列）等安裝方式415
RC-20F Rotary Paddle Level Switch Introduction
Product Overview
The RC-20F rotary paddle level switch is a mechanical control device designed for point-level detection of solid materials (powders, granules) in silos or containers. Driven by a micro-motor, the rotating paddle stops upon contacting materials, triggering a switch signal while cutting off power automatically. It is widely applied in feed, cement, plastics, and chemical industries for material monitoring.319
Constructed with stainless steel shafts and protective housing, the switch features dust-proof sealing and operates within -20℃ to 80℃ (high-temperature version up to 350℃). The paddle rotates at 1 RPM and supports horizontal or 15-20° tilted installation to avoid material impact. Adjustable torque springs accommodate materials with densities from 0.3g/cm³.624
Operating Principle
During no-material conditions, the motor rotates the paddle continuously. When material rises to the paddle level, resistance activates the mechanical transmission: first outputting a level signal, then disconnecting the motor. The system resets automatically after material level drops, ensuring cyclic monitoring via purely mechanical action without electronic interference.1227
Key Features
• Overload protection: Automatic motor slip mechanism prevents damage under excessive paddle load
• Adjustable torque: Five sensitivity settings adapt to materials ranging from lightweight plastics to dense metal particles
• Easy maintenance: Internal components accessible without full disassembly; customizable paddle lengths available
• Environmental resilience: IP65 rating with specialized oil seals to block dust ingress
• Flexible installation: Threaded (RC-10B), flanged (RC-11B), or shaft-protected tube (RC-20 series) mounting options415
RC-20F料位開關
阻旋料位開關產品原理：阻旋料位開關是一種用于固態物料（包括粉狀、粒狀、塊狀、膠狀等）的物位控制器。其利用永磁電機帶動葉片旋轉，當被檢測物料上升至葉片位置時，葉片轉動受阻，該阻力通過傳動軸傳遞到接線盒內的檢測裝置，檢測裝置則向外輸出一個開關信號，并切斷電機電源使葉片停止轉動。當物料下降時，葉片阻力消失，檢測裝置便依靠彈簧的拉力恢復到原始狀態，葉片恢復旋轉狀態。在化工、塑料、鋼鐵、電力、水泥、制藥、飼料、食品等行業得到了的應用。
SR2-10-185當涂電廠用阻旋式料位開關
產品特點：·
進口馬達，可長時間連續運轉；· 油封設計可以防粉塵沿軸滲入；· 扭力,且扭力大小可以調節；· 葉片承受過重負荷時，馬達回轉機構會自動打滑，保護不受損壞；· 接續規格、葉片、長度皆可接受定制。技術參數： · 電源： (A)110VAC (B)220VAC (C)24VAC· 接點容量：5A/250VAC SPDT· 功率：4W· 介電強度： 1500VAC×1min· 葉片轉速：1rpm· 防護等級：IP65· 入線口規格：1/2″PF· 適用小比重：0.3g/ cm3· 溫度：-20～80℃（高溫型耐350℃）· 標準螺紋型」o 接續：1″PFo 適合水平安裝o 接續及牙口至葉片長度可定制·
RC-20F料位開關
JLXK1-311M行程開關
SBW-30KVA三相大功率補償式交流穩壓器(單柜)
WGZ-200B濁度計(儀)
6L2-1.2MVAR電流電壓表
BH-0.66互感器
CJ40-63A/220V接觸器
上一篇 C182-4YD料位開關 http://www.9earn.cn/product/d168045.html
|
